Panel track

The panel track is developed for interior usage. Panels are moving sideways in a special rail. The basis of the construction is the 4 or 5 path extruded aluminium rail. The master connecting rail attach to this top track with a carrier. The carrier is from plastic , so this makes the easy-going and quiet motion possible. The fabric attach to the master connecting rail with valcro. The fixation of the fabric with walcro. This kind of installaton gives the possibility of easy cleaning, You can choose the overtapping between the panels, if you set the roller of the fabric holder profile on the right position. If you set a bigger overlap, you will increase the sun protectionThere is a bottom weight on the bottom of the fabric. It decreases the moving of the panel causes by the wind

Vertical blind

The vertical blind is a tilting and sideways pulling blind. Carriers are mounted into a aluminium rail. Primarily it is made from transparent or blockout fabrics. As well as the slats can be made also from aluminium. The width of the fabric slat can be 127 , 89 , or 63 mm . The track can be also bent or skew , which can be mounted as good onto a triangle doors and windows . operation with motor or manual.

Venetian blind

Structure: pressed aluminium shaft and pressed aluminium parts and accessories

Control: in case of motorised design light detection or programmed automatic control is also possible

Operation: by a 230V motor or by a manual crank

Scope of application: outdoor